Skip to content

BlackVue Power Magic Pro Hardwiring Kit

Save $24.00
Original price $59.99
Current price $35.99
Best Price Guaranteed or We'll Match it


BlackVue Power Magic Pro

The Power Magic Pro hardwiring kit supplies constant power to your BlackVue dash cam from your vehicle’s battery according to the configured voltage and timer to prevent vehicle battery discharge. It is designed to cut off at different voltages or using the timer to protect your vehicle's battery. By installing your dash cam using a Hardwiring Kit, you will gain access to new vehicle features including parking mode. Additional features can be discovered through our Dash Cam Buyer's Guide.

To learn more about the Power Magic Pro, check out our Introduction Guide. For more detailed instructions on how to use the Power Magic Pro Hardwiring Kit, check out our Power Magic Pro Installation Guide, as well as our general Hardwiring Fusebox guide.

For all the tools you need to properly hardwire your dash cam into your vehicle, we would recommend purchasing the Essential BlackboxMyCar Install Package. Purchasing this Hardwiring Kit includes Add-a-Fuse Kits and Fuse Taps. For detailed information on how to use Add-a-Fuses, check out our Add-a-Fuse Setup Guide.

If you have any further questions, our product experts are here to help.


Our video resources below will give you a breakdown of how the Power Magic Pro works. If you are wondering what the difference between Hardwiring Kits vs installing with a Dash Cam Battery Pack is, check out our comparison chart.

For more YouTube videos on the BlackVue Power Magic Pro, click here.

What's Included

  • Power Magic Pro
  • Double-Sided Tape
  • Wire Harness
  • Screws



12V - 24V DC


1A (Max 2A)


12.0V or 12.5V (+/- 0.1V) | 22.8V - 23.2V (+/- 0.1V)


6 Hours - Infinity


South Korea


1-Year manufacturer Warranty


What is Parking Mode?

Parking mode is offered on most of the dash cams available at BlackboxMyCar. While it is important to protect your vehicle while driving, it is just as important to have your vehicle protected while it is parked. When the dash cam is in parking mode, footage will only be saved when there is an impact and/or motion. Parking mode can be enabled with a hardwiring kit or a battery pack.

For more information on parking mode, click here.

What is a Hardwire Kit?

A hardwiring kit enables parking mode. It allows your dash cam to remain powered on even when the vehicle's ignition is turned off. Installation is a breeze as you will only need to find an accessory fuse, constant fuse, and a grounding point.

What is a Battery Pack?

Most customers purchase the battery pack to avoid using the vehicle’s battery to power their dash cam. The battery pack is charged by either being hardwired into an accessory fuse or by being plugged into one of the vehicle's 12-volt cigarette sockets. We recommend the hardwiring the battery pack as it charges the battery pack quicker.

For more information on Battery Packs, click here.

How much footage will my memory card store?

On average, a 2-channel dash cam writes 16GB/hour and a 1-channel dash cam writes about 8GB/hour.

Click here to see all the memory cards we carry.

Do I need a Rear Camera?

Accidents or events don't always happen at the front of the vehicle! Having a rear camera provides coverage for any events or accidents that may happen at the rear of the vehicle.

For more information on rear view cameras, click here.

Do I need a IR Rear Camera?

An IR camera is designed to record the interior of the vehicle in low light conditions. This option is very popular among rideshare drivers.

For more information on why rideshare drivers need dash cams, click here.

What is a CPL filter?

A CPL filter attaches to the dash cam lens to eliminate lens flares, light reflections, and windshield glares.

For more information on CPL filters, click here.

Where do I find the Latest Firmware?

Find the latest firmware and all downloadable content here.

Customer Reviews

Based on 69 reviews
Your vehicle battery will thank you

With this product, you will be able to control when the cameras will get shut off instead of running until the vehicle battery dies.
So much easier to install this than having to work on car batteries.
I recommend this product.

Hi Kevin, thank you for leaving a review and for shopping with us. If you require any further assistance please do not hesitate to reach out!


Zaid was super helpful with my question.

Hi Shawn, thanks for leaving a review! If you have any questions, please don't hesitate to ask us directly. We're here to help!

Very easy to install and works flawlessly

Straightforward instructions, quick an easy install. Eventually going to upgrade to a battery bank setup but this is working as it should in the meantime. Runs the lte blackvue camera for about 10 hours after i stop driving my 2018 ford f150. Going to get another one of these for my wifes jeep!

Hi Cameron, thanks for buying from us. That's some great results so far - hope you keep loving it. Come back anytime!