From EGEN, One of the Largest Battery Manufacturers in the World
Setting Up with a Cellink NEO Battery Pack
Setting Up a Cellink NEO Battery Pack
The Cellink NEO Battery Pack is a battery from EGEN, who is one of the largest battery manufacturers in the world. This battery pack provides extended parking-mode duration, eliminates the wear-and-tear on the vehicle’s battery and is an alternative to hardwiring to your fusebox in general.
With a large 76.8 Wh capacity, the Cellink NEO provides about 15-30 hours of power for a typical one-channel device and about 20-30 hours for a dual-channel device.
The large range of duration is dependent on which dash cam is being used. See below:
BlackVue
BlackVue DR590W Series
DR590W-1CH: 35 Hours
DR590W-2CH: 22 Hours
BlackVue DR750S Series
DR750S-1CH: 30 Hours
DR750S-2CH: 20 Hours
BlackVue DR900S Series
DR900S-1CH: 26 Hours
DR900S-2CH: 16 Hours
Thinkware
Thinkware F770
F770-1CH: 28 Hours
F770-2CH: 21 Hours
Thinkware F800 Pro
F800 Pro-1CH: 46.1 Hours
F800 Pro-2CH: 30 Hours
IROAD
IROAD X9
X9-2CH: 25 Hours
Output Cable Variations For Compatibility
For more information on general hardwire installation with your dash cam, please learn more in our step-by-step battery installation guide.
The Cellink NEO Battery Pack has a couple of options for its output cables, which is the cable that connects the battery to the dash cam. That makes this battery pack extremely versatile as it allows the NEO to be compatible with many dash cams in the market. The most common selection for our customers is a spliced hardwire output cable, which provides compatibility with all Thinkware devices. One end of this cable connects to the Cellink NEO while the other end goes directly to the dash cam.
Confused? No Need to Worry!
When you purchase a dash cam from our collection with a battery pack, our product experts make sure that we add the right cable for you to make life simple. If you have more questions, please don't hesitate to contact our product experts.
Thinkware Dash Cams
Spliced Hardwire Output Cable
The most common selection for our customers is a spliced hardwire output cable, which provides compatibility with all Thinkware devices. One end of this cable connects to the Cellink NEO while the other end goes directly to the dash cam.
BlackVue / VIOFO Dash Cams
12V Cigarette Socket
Thinkware Dash Cams
Unspliced 3-Wire Output Cable
The final selection is an unspliced 3-wire output cable, which is made for those who want to splice wires together for themselves, depending on their dash cams needs.
This is basically an untouched version of the spliced hardwire output cable mentioned above, as what we do is splice the 3-wires to the hardwire kit for Thinkware dash cams.
For More Power, Try an Expansion Pack
If you want even more power, make sure to check out the Cellink NEO Extended Battery Pack, which is an extended battery pack that is connected to the regular NEO.
The Cellink NEO Extended Battery Pack doubles the total power capacity and offers the maximum protection.
If you have any questions, our in-house product experts are to help. Contact us with your questions today and we'll get back to you in under 24 hours.
Explore Our eLearning Guides
Dash Cam Buyer's Guide
New to dash cams? Try out our dash cam buyer's guide to start your journey.
Dash Cam Accessories
Want more out of your dash cam? Find an accessory that's right for you.
Installation Guides
Let us show you how to install your own dash cam & accessories.
Got More Questions?
Not to fret, our in-house product experts are here to help. We have spent years curating helpful content and video guides, helping customers with their dash cams, but we understand that we can always do better. Contact us using the form below and we'll get back to you as soon as we can. We love what we do, because we're here to help you make the most informed purchasing decision.