Skip to content
Original VIOFO A119 V3 and Garmin Mini 2 comparison artwork

VIOFO A119 V3 vs. Garmin Dash Cam Mini 2

Compare controls, recording modes and parked power for the original A119 V3 and Garmin Mini 2

Which cameras are compared?

The original VIOFO A119 V3 and Garmin Dash Cam Mini 2 are front-only cameras with different ways to control and view recordings. The A119 V3 has a screen and local buttons; the Mini 2 uses buttons, voice commands and Garmin Drive. Compare those everyday controls, recording modes and parked-power requirements when choosing a camera or supporting one you already own.

Compare the main features

Original A119 V3 and Garmin Mini 2: controls and setup
Feature Garmin Dash Cam Mini 2 Original VIOFO A119 V3
Controls No display; two buttons. Voice commands save video, take a picture, and turn audio recording on or off. Playback uses Garmin Drive. 2-inch screen and five buttons for local settings and playback. No voice control.
Resolution and HDR 1080p at up to 30 FPS, with Garmin Clarity HDR. 2560×1600 at 30 FPS; HDR recording is 30 FPS. The older V2.5 2880×2160 mode is interpolated, rather than native 3840×2160 UHD.
Wi-Fi and playback Wi-Fi for Garmin Drive viewing and downloads. The camera stops recording while you view its photos or videos in the app. No Wi-Fi; local screen and button controls.
GPS No built-in GPS. A connected GPS-enabled Garmin camera can contribute location in a multi-camera setup; phone pairing alone does not add a receiver. Requires the compatible GPS module with tracking enabled for position, speed and clock synchronization. Check the module and mount in the exact package.
Parked power Continuous power required. The optional OBD-II Constant Power Cable is separate from the fuse-connected Parking Mode Cable. Remote Live View and Parking Guard alerts require internet-connected Wi-Fi and Garmin Drive on a compatible phone. Parking Guard is inactive in Live View or the app gallery. Optional HK3 hardwire kit for parking power. Auto Event Detection, time-lapse or low-bitrate recording; external power is still needed with the supercapacitor. Check exact buffered-event timing against the installed firmware and manual.

On smaller screens, scroll the table sideways to see all columns

Garmin Mini 2 size and placement

The Mini 2 is about the size of a car key and has no on-camera display. Its small body can fit near the rearview mirror, but the right position depends on your windshield, mirror and unobstructed field of view.

Compact dash camera positioned beside a rearview mirror, viewed through the windshield
Compact camera placement near the mirror; check visibility and mounting space in your vehicle

Garmin recording and voice controls

The Mini 2 records 1080p video at up to 30 FPS through a 140° lens. It also has Garmin Clarity HDR.

Its two buttons control microphone recording and save a video segment. Supported voice commands save video, take a picture, and start or stop audio recording. Video playback uses Garmin Drive rather than a voice playback command. Voice recognition depends on the selected supported language and cabin noise.

Garmin Mini 2 daytime footage with microphone audio by Hussain Sajid. If the embedded player does not load, watch this footage on YouTube.

Garmin GPS and phone access

The Mini 2 has no built-in GPS. In Garmin’s multi-camera setup, a connected GPS-enabled Garmin camera can contribute location to saved recordings. Pairing the Mini 2 with a phone alone does not add a GPS receiver.

The Mini 2 has Wi-Fi and connects to Garmin Drive for viewing and downloading recordings. The owner manual notes that the camera stops recording while you view photos or videos from it in the app. Check current phone compatibility and Vault subscription terms before relying on cloud storage.

Person inside a car viewing saved-video thumbnails on a phone
Historical phone-screen illustration; the current Garmin Drive layout may differ

Garmin parked power and remote access

Parking Guard needs continuous power. Garmin’s optional Constant Power Cable connects to the vehicle’s OBD-II port; it is separate from the fuse-connected Parking Mode Cable. Confirm vehicle compatibility and the correct power accessory before installation. Contact our team about your installation.

Remote Live View and Parking Guard alerts require an internet-connected Wi-Fi connection, continuous camera power and Garmin Drive on a compatible phone. Parking Guard is inactive while Live View or the app’s video gallery is in use. The Mini 2 has no forward-collision or lane-departure driver alerts.

A119 V3 sensor and screen

The original A119 V3 uses a 5 MP Sony STARVIS IMX335 sensor and has a 2-inch display with five buttons. The screen provides local menu access and playback, which may suit you if you prefer setting up the camera without a phone connection. The original A119 V3 has no Wi-Fi or voice control.

VIOFO screen camera with five buttons against a road background
A119 V3 screen-and-button design illustration

A119 V3 resolution and HDR

VIOFO lists 2560×1600 recording at 30 FPS for the original A119 V3. Its user guide specifies that enabling HDR sets recording to 30 FPS, so a 60 FPS mode should not be described as HDR recording. Night footage and readable detail depend on lighting, motion and settings.

VIOFO’s older V2.5 firmware explanation describes a 2880×2160 mode at 30 FPS as interpolated. It is an upscaled output from the original sensor, not native 3840×2160 UHD capture. Check the firmware installed on your exact camera before selecting a mode.

A119 V3 mounting and controls

The A119 V3 slides onto its windshield mount and can be removed from it. Use the camera’s screen to check the view and menu settings during setup. Route the power cable according to your vehicle’s installation requirements, and check whether your package includes the compatible GPS mount and parking-power accessories. Ask our team about your setup.

A119 V3 parking modes and power

The A119 V3 offers Auto Event Detection, time-lapse recording and low-bitrate recording for parked use. VIOFO specifies the optional HK3 hardwire kit for parking power. Its product information lists buffered event recording, but exact pre-event and post-event timing should be checked against your camera’s firmware and manual.

The A119 V3 uses a supercapacitor rather than a rechargeable battery. Ongoing parked recording still needs external power. Plan the parking-power installation separately from choosing a recording mode. Contact our team about parking power.

Camera and dotted cable route illustrated inside a vehicle cabin
Conceptual cable-route illustration; use vehicle-specific installation instructions

A119 V3 GPS module

With the compatible GPS module connected and GPS tracking enabled, the A119 V3 can record position and speed information and synchronize its clock. Check the exact package and mount when buying accessories or replacing an existing setup; GPS-module inclusion is a bundle detail.

Choose the controls and power setup you need

Choose the Mini 2 if a compact screenless camera, voice commands and phone access fit your routine. Choose the original A119 V3 if you prefer its screen, local controls and three parking-recording modes. Both support HDR; the A119 V3’s interpolated mode is not a native UHD advantage.

Check the microSD card, GPS module and parked-power accessories supplied with the exact package. For help with a camera you own or a compatible replacement, contact the BlackboxMyCar team.

View the VIOFO A119 V3 with GPS

Contact Us