Overview

The easiest way to use Parking Mode

In terms of functionality, the OBD-II cable essentially achieves the same result as hardwiring your dash cam to your vehicle’s fuse panel. It supplies power to the dash cam even when the vehicle is parked, and the BlackVue monitors the power level to shut down if the voltage drops too low (you can adjust the cutoff level using the BlackVue App).

The main advantage of the OBD-II Power Cable is its convenience. Simply plug it in, and you’re all set. It’s likely the easiest solution for enabling Parking Mode.

Compatible with most BlackVue dash cams

All BlackVue dash cams that have a built-in voltage monitor are supported. In other words, the BOC-300 supports most models since the DR750X/DR900X Series. If your BlackVue dash cam came with a Hardwiring Power Cable (with yellow, red and ground wires), then it is compatible with the OBD II Power Cable.

Supported models:

DR970X Series
DR970X LTE Series
DR900X Plus Series
DR750X Plus Series
DR900X Series
DR750X Series

What's Included

1 x OBD-II Power Cable (BOC-300)

Specifications

Cable Length

3m / 9.84ft

DC Plug

Ø3.5 x Ø1.1mm

Input

OBD II

Max Output

3A / 12V (36W)

Weight

0.176 lb / 80 g

Warranty

1 year warranty

Resources

Beltronics - Radar Detectors

Direct Wire PowerCord for Escort and Beltronics Radar Detectors

Subscribe to Our Newsletter