Skip to content
Vantrue Voltage Display Type-C Hardwire Kit
SKU VT-HK

Vantrue Voltage Display Type-C Hardwire Kit

Availability:
in stock, ready to be shipped
$41.99 - $41.99
$41.99 CAD
$41.99 - $41.99
$41.99 CAD
Best Price Guaranteed
Every order includes:

Chat with an expert

Talk to a dash cam expert before you order.

Contact an expert

Vantrue Voltage Display Type-C Hardwire Kit

The Vantrue Voltage Display Type-C Hardwire Kit powers compatible USB-C Vantrue dash cams from the vehicle fuse box for cleaner cable routing, parking mode support, and a built-in screen that shows vehicle voltage in real time.

This Vantrue hardwire kit is built for drivers who want parking mode without guessing what the battery is doing. Adjustable low-voltage protection helps shut the dash cam down before the vehicle battery drops too far, while 12V and 24V support makes it usable across many cars, trucks, buses, off-road vehicles, and other compatible DC systems.

Voltage Display

Battery Protection

Parking Mode

USB-C Output

12V / 24V Systems

Real-time voltage display for cleaner hardwiring

The Vantrue Voltage Display Hardwire Kit shows your vehicle battery voltage on a built-in electronic screen. That makes it easier to confirm the dash cam is receiving power and gives you a clearer read on the vehicle battery during parked recording.

For drivers running parking mode, that display is useful. Instead of treating the hardwire kit like a sealed black box, you get a quick visual check of the power situation before leaving the vehicle parked.

Vantrue Voltage Display Type-C Hardwire Kit front view

Adjustable low-voltage battery protection

The kit includes three low-voltage cutoff settings for 12V and 24V vehicles: 11.6V / 23.6V, 12.0V / 24.0V, and 12.4V / 24.4V.

Once the vehicle battery drops to the selected cutoff level, the hardwire kit shuts dash cam power down automatically. It is the right setup for parking mode because it helps protect the vehicle battery while still allowing the camera to monitor when parked.

Vantrue hardwire kit low-voltage protection display

Enables parking mode for compatible Vantrue dash cams

Hardwiring gives compatible Vantrue dash cams access to constant power for parking mode. That lets the camera keep monitoring after the ignition is off, depending on the parking mode features supported by the dash cam itself.

This is the cleaner way to run parking mode compared to leaving a cable loose in the cabin. The wiring runs to the fuse box, keeping the install tidier and more permanent.

Compatible Vantrue dash cams available from BlackboxMyCar include:

Vantrue Type-C hardwire kit for parking mode

Built for 12V and 24V vehicle systems

The Vantrue Type-C hardwire kit supports both 12V and 24V vehicle power systems. That makes it suitable for many cars, trucks, off-road vehicles, buses, and other compatible DC-powered vehicles.

For shoppers installing a Vantrue dash cam outside a basic passenger-car setup, that wider voltage support makes this kit more flexible than a simple 12V-only cable.

Vantrue hardwire kit supports 12V and 24V vehicle systems

USB-C compatibility across Vantrue dash cams

This hardwire kit is designed for USB-C Vantrue dash cams. Vantrue lists compatibility with models including N4S, N4 Pro S, N5S, E360 ACE, E360, N2X, N5, N4 Pro, N4, E1, E2, E3, S2, N2S, X4S, and N2 Pro (2023).

It may also power other compatible USB-C devices such as GPS navigators or radar detectors, but for BlackboxMyCar shoppers, its main job is straightforward: a cleaner Vantrue dash cam install with parking mode power.

Vantrue USB-C hardwire kit compatibility for Type-C dash cams
What's Included
  • Vantrue Voltage Display Type-C Hardwire Kit
Specifications
Product Vantrue Voltage Display Type-C Hardwire Kit
SKU VT-HK
Connector USB Type-C
Input Voltage 12V / 24V vehicle systems
Low-Voltage Protection 11.6V / 23.6V, 12.0V / 24.0V, 12.4V / 24.4V
Display Real-time electronic voltage display
Primary Use Hardwired dash cam power and parking mode support
Compatible Dash Cams USB-C Vantrue models including N4S, N4 Pro S, N5S, E360 ACE, E360, N2X, N5, N4 Pro, N4, E1, E2, E3, S2, N2S, X4S, and N2 Pro (2023)
Barcode 0193368004404
Frequently Asked Questions

What does the Vantrue Voltage Display Hardwire Kit do?

It connects a compatible USB-C Vantrue dash cam directly to vehicle power, allowing a cleaner install and supporting parking mode when the dash cam supports parked recording.

Does this hardwire kit show vehicle voltage?

Yes. It has an electronic display that shows voltage in real time, so you can quickly check the vehicle battery level during setup or parked recording.

What low-voltage cutoff settings does it support?

The kit supports three cutoff settings: 11.6V / 23.6V, 12.0V / 24.0V, and 12.4V / 24.4V. The right setting depends on the vehicle and how conservative you want to be with battery protection.

Will this work with 24V vehicles?

Yes. Vantrue lists support for 12V and 24V vehicle systems, making it suitable for many passenger vehicles and larger compatible DC-powered vehicles.

Which Vantrue dash cams is this compatible with?

Vantrue lists compatibility with USB-C models including N4S, N4 Pro S, N5S, E360 ACE, E360, N2X, N5, N4 Pro, N4, E1, E2, E3, S2, N2S, X4S, and N2 Pro (2023).

Resources