Passer au contenu
Faites votre shopping de Noël en juillet dès aujourd'hui ! Soldes jusqu'au 9 août 🎁
Faites vos achats de Noël en juillet dès aujourd'hui ! Soldes jusqu'au 9 août 🎁
UGC InstallKit-2EDash

Pack d'installation essentiel de BlackboxMyCar

Disponibilité:
Stock bas
Disponibilité:
en stock, prêt à être expédié
Économisez 35% Économisez 35%
Prix d'origine $56.99
Prix d'origine $49.99 - Prix d'origine $56.99
Prix d'origine $56.99
Prix actuel $36.99 CAD
$29.99 - $36.99
Prix actuel $36.99 CAD
Meilleur prix garanti
Select Option de fusible

Kit d'installation essentiel BlackboxMyCar

Le kit d'installation essentiel BlackboxMyCar vous offre les outils de base et les prises de dérivation de fusibles nécessaires pour une installation plus propre de la caméra de tableau de bord câblée. Il est conçu pour les conducteurs qui souhaitent un mode stationnement, un câblage dissimulé et moins de surprises le jour de l'installation.

Choisissez l'option Pour caméra de tableau de bord lorsque vous câblez une caméra de tableau de bord directement à la batterie du véhicule. Choisissez l'option Pour bloc-batterie lorsque vous câblez un bloc-batterie de caméra de tableau de bord, tel que la série PowerCell de BlackboxMyCar.

Dérivateurs de fusibles

Outil de garniture

Testeur de circuit

Fusibles 20A

Câblage propre

Choisissez la bonne option de fusible avant d'installer

Le kit d'installation essentiel BlackboxMyCar est livré en deux options de fusibles : Pour caméra de tableau de bord et Pour bloc-batterie. L'option caméra de tableau de bord comprend deux fusibles de chaque type car la plupart des kits de câblage ont besoin d'un fusible constant et d'un fusible commuté par accessoire.

L'option bloc-batterie comprend un fusible de chaque type car l'installation d'un bloc-batterie nécessite généralement une source d'alimentation commutée par contact. Si vous n'êtes pas sûr du kit qui convient à votre configuration, consultez notre guide d'installation de dérivateurs de fusibles ou le centre d'installation de caméras de tableau de bord.

Kit d'installation essentiel BlackboxMyCar avec dérivateurs de fusibles et outils d'installation

Dérivateurs de fusibles 20A pour les styles de fusibles courants

Les dérivateurs de fusibles inclus sont de 20A et couvrent les styles de fusibles courants Low Profile, Mini, Micro2 et ATO. Cela offre aux installateurs un ensemble de démarrage pratique pour la plupart des véhicules de tourisme.

Toujours confirmer le type de fusible et le comportement du circuit dans le véhicule avant de connecter un kit de câblage. Un testeur de circuit est inclus afin que vous puissiez identifier les circuits constants et commutés par accessoire au lieu de deviner. Pour le câblage d'accessoires, consultez nos câbles et kits de câblage pour caméra de tableau de bord.

Boîte à fusibles de véhicule pour l'installation d'une caméra de tableau de bord câblée

Petits outils d'installation qui économisent du temps

Ce kit comprend les outils de base qui rendent une installation câblée plus propre : un testeur de circuit, un outil de retrait de garniture, des serre-câbles et des autocollants. L'outil de garniture aide à dissimuler le câblage sans endommager les panneaux, tandis que les serre-câbles aident à maintenir les câbles lâches sous contrôle.

C'est le type de kit d'installation qui empêche un simple travail de week-end de se transformer en une chasse aux pièces. Associez-le à votre kit de câblage de caméra de tableau de bord, choisissez la bonne option de fusible et acheminez le câblage proprement de la boîte à fusibles à la caméra ou au bloc-batterie.

Outils et accessoires d'installation de caméra de tableau de bord câblée
Ce qui est inclus : 1 de chaque (pour les blocs-batteries)
  • 1x Testeur de circuit
  • 1x Outil de retrait de garniture
  • 2x Serre-câbles
  • 2x Autocollants assortis BlackboxMyCar
  • 1x Dérivateur de fusible Low Profile (20A)
  • 1x Prise de dérivation de fusible Low Profile (20A)
  • 1x Dérivateur de fusible Mini (20A)
  • 1x Prise de dérivation de fusible Mini (20A)
  • 1x Dérivateur de fusible Micro2 (20A)
  • 1x Prise de dérivation de fusible Micro2 (20A)
  • 1x Dérivateur de fusible ATO (20A)
  • 1x Prise de dérivation de fusible ATO (20A)

Remarque : Les types de dérivateurs de fusibles inclus sont Low Profile (20A), Mini (20A), Micro2 (20A) et ATO (20A).

Ce qui est inclus : 2 de chaque (pour les caméras de tableau de bord)
  • 1x Testeur de circuit
  • 1x Outil de retrait de garniture
  • 2x Serre-câbles
  • 2x Autocollants assortis BlackboxMyCar
  • 2x Dérivateurs de fusibles Low Profile (20A)
  • 2x Prises de dérivation de fusibles Low Profile (20A)
  • 2x Dérivateurs de fusibles Mini (20A)
  • 2x Prises de dérivation de fusibles Mini (20A)
  • 2x Dérivateurs de fusibles Micro2 (20A)
  • 2x Prises de dérivation de fusibles Micro2 (20A)
  • 2x Dérivateurs de fusibles ATO (20A)
  • 2x Prises de dérivation de fusibles ATO (20A)

Remarque : Les types de dérivateurs de fusibles inclus sont Low Profile (20A), Mini (20A), Micro2 (20A) et ATO (20A).

Spécifications
Type de produit Kit d'installation de câblage de caméra de tableau de bord
Options de fusibles Pour caméra de tableau de bord : 2 de chaque | Pour bloc-batterie : 1 de chaque
Courant nominal des dérivateurs de fusibles inclus 20A
Types de dérivateurs de fusibles inclus Low Profile, Mini, Micro2, ATO
Outils inclus Testeur de circuit, outil de retrait de garniture, serre-câbles, autocollants
Idéal pour Câblage de caméra de tableau de bord, configuration du mode stationnement, installations de blocs-batteries
Catégories compatibles Caméras de tableau de bord, blocs-batteries et kits de câblage
Questions fréquemment posées

Quelle option de fusible dois-je choisir ?

Choisissez Pour caméra de tableau de bord si vous câblez votre caméra de tableau de bord directement à la boîte à fusibles du véhicule. Choisissez Pour bloc-batterie si vous câblez un bloc-batterie de caméra de tableau de bord à la boîte à fusibles du véhicule.

Les dérivateurs de fusibles inclus sont-ils de 20A ?

Oui. Les dérivateurs de fusibles inclus sont de 20A et sont disponibles dans les styles Low Profile, Mini, Micro2 et ATO.

À quoi servent les dérivateurs de fusibles ?

Les dérivateurs de fusibles permettent à un kit de câblage de se connecter à la boîte à fusibles du véhicule tout en protégeant le circuit d'origine. Ils sont couramment utilisés pour le mode stationnement des caméras de tableau de bord et les installations de charge des blocs-batteries.

Ce kit comprend-il un câble de câblage de caméra de tableau de bord ?

Non. Ce kit comprend des outils d'installation et des prises de dérivation de fusibles, et non le câble de câblage spécifique à la caméra de tableau de bord. Achetez le câble de câblage correct dans notre collection de câbles et kits de câblage pour caméra de tableau de bord.

Puis-je utiliser ce kit d'installation avec un bloc-batterie PowerCell ?

Oui. Choisissez l'option Pour bloc-batterie lors de l'installation d'un PowerCell ou d'un bloc-batterie de caméra de tableau de bord compatible. Pour une aide au câblage spécifique à la batterie, consultez notre guide des câbles de sortie.

Ressources
  • 5 stars: 73 (77%)
  • 4 stars: 14 (15%)
  • 3 stars: 3 (3%)
  • 2 stars: 1 (1%)
  • 1 star: 4 (4%)
L
Lee A. (Pasadena, US)
Made hardwiring easier

Made the hardwiring process easier. The tool made it easier to determine where to plug in the wires. I'm glad it bought so didn't have to go to the store to buy fuse taps and a bunch of extra fuses that I won't need. Definitely worth the money. Worked well with my Hyundai Tucson.

J
Jason E. (Colorado Springs, US)
F-150 owners beware

2021 F-150 powerboost owner here. The fuses don't fit without YOU having to modify them. Have to file them down. Micro2. The tools were great though with the whole kit. Going to test these on my 2020 stinger to see if they are a direct fit.

A
Anonymous (Toronto, CA)
wrong fuses in the dashcam kit

The Essential BlackboxMyCar Install Package packs heavy-duty 20A (Yellow) fuses. Using a 20A fuse means the circuit will allow massive electrical currents to pass through before blowing. If a wire pinches or short-circuits, a 20A fuse will not blow fast enough, which can melt the thin Viofo power cable or damage the camera. After I spent so much money on this setup, now I have to go to the dealership to buy 5A fuses.

Thanks for your feedback. We understand your concern regarding fuse amperage and appreciate you taking the time to share it.

The included fuses are part of the install package we have supplied for many dash cam setups over the years, and we have not found the kit itself to be unsafe when installed correctly. The add-a-fuse setup is intended to protect the tapped vehicle circuit while allowing the dash cam hardwire kit to operate as designed.

That said, if you prefer to use a lower-rated fuse for your specific setup, you can purchase a compatible 5A fuse from most automotive parts or hardware stores. There should be no need to visit a dealership.

C
Customer (Lake Elsinore, US)
Product came

Product came damaged

Thanks for bringing this to our attention, Dominic. We’re sorry to hear that. Our sales and support team will reach out to you directly for further assistance.

C
Customer (Minneapolis, US)
Everything I ordered was delivered on time and was 100% correct

Everything I ordered was delivered on time and was 100% correct.

Thanks for the review, Bradlee! We’re glad everything arrived on time and exactly as expected.

C
C H. (Montreal, CA)
Exactly as ordered

Great quality! New in package

j
john h. (Las Vegas, US)
Every thing I needed

Every thing I needed included

Thanks for the review, John! We’re happy to hear the install package had everything you needed.

C
Customer (Statesville, US)
Great product…

Great product…easy installation and works fine…
App is a bit time consuming to understand and manual is ok but out dated by photos of app
Needs more info on Parking mode..
but will order the battery pack asap

C
Customer (Charlotte, US)
Most of what you need

If you aren’t sure exactly what you need for an install this is definitely a good thing to purchase. The only issue I had was that the fuses included are all 20 amp which is way too high for installing a dashcam. Still a decent purchase.

C
C. (Yaphank, US)
Fittings were off

Wasn’t able to get any of the fuses to fit into their respective adapters. I’m not sure if I got a bad batch or if I did something incorrectly but I spent way too much time trying to simply insert the fuses into their correct adapters and they just refused to go in.
I ordered a different set from elsewhere to compare how everything fit.

C
Customer (Tacoma, US)
Useful parts

The wedge tool for lifting seals and inserting cable was the best part. The tester was useful and the others parts were just incase I needed more. But I would buy these parts again with any install

A
Aaron

High quality

G
Griffin Y. (Charlottesville, US)
Wrong Size and Too High Amp Rating

This kit, despite being close to $30 on sale, did not work in the slightest. First, the taps sockets are too wide to fit into my fusebox. I don't exactly drive an out of the ordinary car - I drive a Crosstrek, one of the most common cars in the country. I've read other reviews of people having to file down the socket to fit. But my question is, how in the world are these the wrong size for a standard sized fuse slot? The point of buying a $30 installation kit is that everything should be ready to work out of the box. I don't mind having to crimp or solder wires together, but these are genuinely the wrong parts. Not to mention, the crimping sockets are way too big for the tiny wires included in the hardwire kit. There's no way you'll get a good, secure connection with this type of fit.

Second, the installation guides listed on the website explicitly state that when wiring a camera into your fusebox, you should use a fuse of equal or lesser value than the fuse you are tapping into. So in theory, if I'm following the advice of the guide and tapping into things like my mirrors and cigarette lighter, all of which are between 7.5 and 15 Amps, how does it make sense that the only fuses included in the kit are all 20 Amps? Not only does this contradict with the posted guides and instructions, but a 20 Amp fuse does nothing to protect a camera that draws less than 2 Amps.

This kit is a waste of money. Save yourself the headache and buy the fuses and taps from an autoparts store. You'll thank yourself later. I'm meanwhile going to hope that Black Box gives me a refund for this kit.

C
Customer (Indio, US)
Handy little kit

Helped with the installation. The test light was essential for finding the accessory fuse to hardwire my blackvue.

C
Customer (Los Angeles, US)
Love It !!!

Perfect

C
Carl (Orillia, CA)
Easy Installation

Made for easy installation of the new BlackVue DR970X-2CH Plus on my 2024 Subaru Crosstrek with Eyesight.

C
Customer (Athens, GR)

Perfect.

C
Customer (Yonkers, US)
Excellent Customer Support, even years out after purchase

Could not recommend BlackBoxMyCar and more. They are fantastic and the customer service is unparalleled. No other place to look other than these guys!!!

V
Van N.H.P. (Seahurst, US)
Perfect for for my VIOFO

The kit has all the part to install my VIOFO cam. Highly recommendded

V
Van N.H.P. (Seahurst, US)
Perfect for for my VIOFO

The kit has all the part to install my VIOFO cam. Highly recommendded

H
Ho H.C. (Toronto, CA)
Great kit for installing dash cam

It's my first time installing my own dash cam. I was a bit scared because I had to take off the front panel in my car to tap those fuses, but after following the guide from the website by using all the tools come with this kit. The whole process was super smooth.

D
David W. (Vancouver, CA)
A kit that's well thought out

This is a neat kit to help you set up your dash cam.

J
Jooyoung C. (Toronto, CA)
Great deal on a great product

Install was pretty straightforward with the hardwire kit. Thanks!

J
Jooyoung C. (Toronto, CA)
Great deal on a great product

Install was pretty straightforward with the hardwire kit. Thanks!

M
Michel B. (Rockland, CA)
It's all you need

I got the essential install package and it really facilitated the installation of my dashcam. Everything I needed was in the package.

M
Marc B. (Newcastle, CA)
A Complete Package

Purchased the Viofo a139 with a Powercell 8 for parking mode. The kit came with everything for
the install. Highly recommended.

G
Goran J. (Oshawa, CA)
Good kit but Micro2 doesn't quite fit a 2022 F150

Great starter kit. The tester works as expected and lots of sizes to work with. Only issue is that the micro2 fuse tap is a little too big for a gen 14 F150. A few minutes shaving the casing with an utility knife did the trick.

F
Forrest W. (Memphis, US)
Everything you need!

This kit makes finding your fuse box the hardest thing about hardwiring your dashcam. It's got everything you could ever need to get the job done, including a circuit tester that will be useful even after your done with this project. It's a great value for what you get annd very easy to recommend.

N
Nazam S. (Scarborough, CA)
Best customer service

Best customer service every time I call they always help me.

P
Patrick H. (Reston, US)
Great product with helpful install instructions.

First time installing one of these and I wanted to hardwire it. The whole process was pretty easy thanks to the installation kit that is offered as an option. Purchased this device from a friend's recommendation, and I will recommend this to others down the line. Thanks!