BlackVue Tamper-Proof Case (BTC-2A for DR590/DR490/DR470/DR430 Series)

Save $10.00
$49.99
$39.99

Overview

BlackVue Tamper-Proof Case (BTC-2A for DR590/DR490/DR470/DR430 Series)

The BTC-2A is a tamper-proof case for BlackVue dash cams. It fits over the housing of the front unit and prevents formatting or removal of the SD card, unplugging of power or coaxial cables, and removal of the dash cam from the mount. It locks using hex bolts and an Allen key is provided to lock and unlock the case. The articulation/rotation of the camera is also limited by this case so the driver cannot rotate it 180° to face the interior. This may be useful for fleets as well as private cars as it makes theft of the camera and footage much more difficult.

Compatible with the following models:

  • BlackVue DR590W-2CH
  • BlackVue DR590W-2CH IR
  • BlackVue DR590W-1CH
  • BlackVue DR590-2CH
  • BlackVue DR590-2CH IR
  • BlackVue DR590-1CH
  • BlackVue DR490-2CH
  • BlackVue DR470-2CH
  • BlackVue DR470-2CH IR
  • BlackVue DR450-1CH
  • BlackVue DR430-2CH
  • BlackVue DR430-2CH IR

Disclaimer

BTC-2A is designed for use in regular passenger cars with a windshield rake angle between 20° and 90°. Vehicles with very upright windows will not work with the BTC-2A as the camera would be pointed very low.

What's Included

  • Tamper-Proof Case
  • Allen Wrench

FAQ

What is Parking Mode?

Parking mode is offered on most of the dash cams available at BlackboxMyCar. While it is important to protect your vehicle while driving, it is just as important to have your vehicle protected while it is parked. When the dash cam is in parking mode, footage will only be saved when there is an impact and/or motion. Parking mode can be enabled with a hardwiring kit or a battery pack.

For more information on parking mode, click here.

What is a Hardwire Kit?

A hardwiring kit enables parking mode. It allows your dash cam to remain powered on even when the vehicle's ignition is turned off. Installation is a breeze as you will only need to find an accessory fuse, constant fuse, and a grounding point.

What is a Battery Pack?

Most customers purchase the battery pack to avoid using the vehicle’s battery to power their dash cam. The battery pack is charged by either being hardwired into an accessory fuse or by being plugged into one of the vehicle's 12-volt cigarette sockets. We recommend the hardwiring the battery pack as it charges the battery pack quicker.

For more information on Battery Packs, click here.

How much footage will my memory card store?

On average, a 2-channel dash cam writes 16GB/hour and a 1-channel dash cam writes about 8GB/hour.

Click here to see all the memory cards we carry.

Do I need a Rear Camera?

Accidents or events don't always happen at the front of the vehicle! Having a rear camera provides coverage for any events or accidents that may happen at the rear of the vehicle.

For more information on rear view cameras, click here.

Do I need a IR Rear Camera?

An IR camera is designed to record the interior of the vehicle in low light conditions. This option is very popular among rideshare drivers.

For more information on why rideshare drivers need dash cams, click here.

What is a CPL filter?

A CPL filter attaches to the dash cam lens to eliminate lens flares, light reflections, and windshield glares.

For more information on CPL filters, click here.

Where do I find the Latest Firmware?

Find the latest firmware and all downloadable content here.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

You recently viewed

Clear recently viewed